Adaptador de banco CTS para ECM Cummins CM870 y CM871 con el conector de la ECM, conector de alimentación de 4 pines, botón de ROM boot y conector gris hacia el cable base

Cummins CM850 / CM870 / CM871 / CM875 / CM876 Bench Adapter (ISX, ISM, ISB, ISC, ISL, Signature)

$149.00
Sale price  $149.00 Regular price 
Skip to product information
Adaptador de banco CTS para ECM Cummins CM870 y CM871 con el conector de la ECM, conector de alimentación de 4 pines, botón de ROM boot y conector gris hacia el cable base

CUMMINS · CM850 · CM870 · CM871 · CM875 · CM876 · J1939 · J1708

NEW

Cummins CM850 / CM870 / CM871 / CM875 / CM876 Bench Adapter (ISX, ISM, ISB, ISC, ISL, Signature)

$149.00
Sale price  $149.00 Regular price 
  • Works or we
    swap it: 30 days
  • Ships next
    business day
  • Free shipping
    over $250Otherwise $12.95
Cable base de banco CTS con pinzas de batería, conector redondo de diagnóstico de 9 pines y salida gris para el adaptador

You need the base cable

You buy it once and it works with every adapter.

Base cable
$169
This adapter
$149
Together
$318

✓ Together they ship free in the U.S.

Already have the base? Use the add to cart button above.

Sure it's your ECM? Check the adapter guide

Connects a Cummins CM87x-family ECM to the CTS bench base cable so you can read and program it on the bench, no truck needed. One adapter for the whole family.

🇺🇸 Made in USA, in Houston, Texas, from domestic and imported components.

  • Fits: CM870 (ISX, ISM, Signature), CM871 (ISX, ISM), CM875 and CM876 (ISM) and CM850 (ISB, ISC, ISL), approx. 2002–2010
  • ECM side: the ECM connector and the 4-pin power connector
  • ROM boot button: to recover an ECM left half-programmed
  • Base side: gray connector that plugs into the CTS base cable
  • Communication: J1939 and J1708/J1587
  • Protection: braided sleeve and heat shrink

Requires the CTS base cable ($169), which you buy once.

Everything about this cable

How it works
  1. Plug the adapter into the ECM and into the base cable.
  2. Clip the leads to a 12 V battery or power supply and turn on the ignition switch.
  3. Connect your interface (Nexiq USB-Link, DLA+ or any RP1210 adapter) to the round 9-pin diagnostic connector.
  4. Open your programming software and work the ECM on the bench, no truck needed. When the software asks you to cycle the key, use the same switch.
What is NOT included
  • The communication interface (Nexiq, DLA+ or other)
  • Programming software or its licenses
  • The battery or power supply, or the ECM

Not sure if your ECM is a CM870, CM871 or another one? Message us on WhatsApp with a photo of the ECM label and we will confirm it.

Works or we swap it: 30 days when CTS is at fault (exchange, not refund) + 12 months against manufacturing defects. CTS is an independent manufacturer; Detroit Diesel, Freightliner, Cummins and Caterpillar are mentioned only to show compatibility.

Complete it with