CTS GUIDE · CUMMINS INSITE
Before programming a Cummins, back up the ECM.
In INSITE, create a template with the configuration the ECM has right now. If you later need to see how it was or bring a parameter back, you already have the reference.
Programming without saving the original information first is working without a backup. The more information you have before you start, the better.
Before touching anything
What you need to save
Three backups of every ECM. Without them, if something goes wrong, there is no way back to how it came.
The template
Features and Parameters as they come: max road speed, cruise, idle shutdown, PTO and the rest.
INSITE · TemplateThe ECM image
A full snapshot of the ECM: parameters, calibration and trip data. It opens without being connected.
INSITE · ECM ImageThe engine data
ESN, CPL, calibration code and revision. A photo of the engine dataplate and of the ECM label.
Engine dataplate · ECM labelStep by step
How to make the backup in INSITE
Key ON, engine off. Menu names may change a little depending on your INSITE version.
Connect to the ECM
Your interface (INLINE or another RP1210) on the diagnostic connector. Open INSITE and connect.
Write down the identification
ESN, CPL, calibration and revision, in the ECM summary. Compare them with the engine dataplate.
Create the template
Open Features and Parameters and save them as a template. Put the unit or the ESN and the date in the name.
Create the ECM image
From the same connection, save the ECM image.
Copy it off the laptop
To a USB drive or the cloud. If the laptop fails, the backup goes with it.
Now you can program
If you need to bring a parameter back, open the template and compare.
So they don't get mixed up
Template or image: save both
| Item | Template | ECM image |
|---|---|---|
| What it saves | The Features and Parameters | Parameters, calibration and trip data |
| What it's for | Comparing and bringing parameters back after programming | Seeing how the whole ECM was, without connecting |
| When | Always, before changing any parameter | Always, before loading a calibration |
Before changing a calibration
A rating gets changed only to another Cummins-certified rating for that engine and that CPL. Our 27-point checklist before raising HP and torque is the step that comes first.
Cummins programming
Would you rather we do it?
CTS programs Cummins ECMs in Houston and remotely, with a backup before touching anything. Send us a photo of the engine dataplate and we'll tell you what can be done.
See how we program your ECM →For the shop
Work Cummins ECMs on the bench
Read, back up and program out of the truck. You buy the base cable once and it works with every adapter.
Cummins CM2350 Bench Adapter for ECM Programming
$129
Cummins CM850 / CM870 / CM871 / CM875 / CM876 Bench Adapter (ISX, ISM, ISB, ISC, ISL, Signature)
$149
CTS Bench Base Cable for ECM Programming (J1939 & J1708)
$169The video
The video that brought you here
@cartuningstarcts Going to program a Cummins? Learn what to check before connecting the ECM.
Watch on TikTok
Guide for information only. CTS is an independent shop and manufacturer; Cummins and INSITE are mentioned only to show compatibility. Calibration changes are made only within the manufacturer's certified ratings.